October 29, 2024
No Comments
How to install a hard drive for TIGERSECU DVR and NVR? Where should it be installed?
Question: How to install a hard drive for TIGERSECU DVR and NVR? Where should it be installed?
The diagram below is the step-by-step guide for hard drive installation. Before replacing or installing the hard drive, ensure the DVR/NVR is powered off, and the power adapter is disconnected.
A) Use a screwdriver to open the box.
B) Remove the top cover.
C) Prepare the hard drive and four screws used to secure the HDD.
D) Connect the power and SATA cable to the hard drive while paying attention to the orientation of the HDD.
E) Carefully place the hard drive to match the mounting holes on the bottom and the side of the DVR.
F) Secure the HDD to the bottom cover with screws from the bottom or side.
After installing the hard drive, format it by navigating to the DVR/NVR Main Menu. Select the HDD Menu, choose the hard drive, and click Format.
Facebook
Twitter
Email
Print
Tigersecu
Categories
Latest Post
October 29, 2024
1 Comment
October 18, 2024
No Comments
October 17, 2024
No Comments
October 17, 2024
No Comments
June 7, 2024
No Comments